Reply To: Control more than one EV3

HomeForumsMonoBrick Communication LibraryControl more than one EV3Reply To: Control more than one EV3

#4022
Author Image
Anders Søborg
Key Master

Yes – that is actually possible. However IP filtering has not been implemented but should be fairly strait forward. But if you don’t know how to implement this yourself then a workaround could be to connect one brick at a time – when MonoBrick is connected the EV3 will stop broadcasting its IP address. So you need to

1. Connect the EV3 to the WiFi network
2. Connect to the EV3 using MonoBrick

Repeat this three times

Anders

Posted in

Make a donation