Forum Replies Created
-
AuthorPosts
-
August 22, 2015 at 19:09 in reply to: Can't use Communication Library in Windows Phone project because of architecture #5455

Anders SøborgParticipant
Anders SøborgParticipantWhy worry about version 1.04 when you have MonoBrick firmware 🙂
/Anders
November 7, 2014 at 19:19 in reply to: Mindsensors' GlideWheel sensor (and possibly other sensors from MS) doesn't work #4962
Anders SøborgParticipantHi there
The folks over at mindsensors.com are kind enough to send me a sample for me to work with…keep me posted if you make any progress and I will do the same.
/Anders
-
This reply was modified 11 years ago by
Anders Søborg.
November 6, 2014 at 21:56 in reply to: Mindsensors' GlideWheel sensor (and possibly other sensors from MS) doesn't work #4958
Anders SøborgParticipantHi
Did you get this working?
/Anders

Anders SøborgParticipantWe are trying to deal with the same issue in two different threads. Look at the last answer that i posted here and post in this thread instead.
/Anders
November 2, 2014 at 11:51 in reply to: Mindsensors' GlideWheel sensor (and possibly other sensors from MS) doesn't work #4950
Anders SøborgParticipantHi there
I just had a look at this code and it seems that he is using a readAndWrite. Have you tried this?
/Anders
November 2, 2014 at 11:48 in reply to: Mindsensors' GlideWheel sensor (and possibly other sensors from MS) doesn't work #4949
Anders SøborgParticipantHi there
Try to read 8 bytes instead of four. I found that some sensors only supports read 8 bytes at a time. If this does not work try to read a single byte.
/Anders

Anders SøborgParticipantHi there
Thanks a lot I will have a look at it
/Anders

Anders SøborgParticipantA new version was uploaded a few days back. Everything should be working now…
Anders
-
This reply was modified 11 years ago by
-
AuthorPosts

Follow