Ev3 stuck on booting logo for a while, then shuts down.

[Evaldas]

I installed most recent image onto a 16gb micro SD, as per instructions. However, when I plug the card into ev3, and boot it up, it won’t work. It hangs at loading screen, where only the logo is monobrick logo is visible, and after a while shuts down completely. What gives?

It might be useful to add there are no loading indication, no text whatsoever. Just the logo sitting there.

• This topic was modified 7 years, 10 months ago by Evaldas.

[Tcm0]

Maybe you need an older firmware.

[Author]

Posts