EV3 First boot – hangs on 'Starting…'

HomeForumsMonoBrick EV3 FirmwareEV3 First boot – hangs on 'Starting…'

This topic contains 1 reply, has 2 voices, and was last updated by Author Image Anders Søborg 2 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4861
    Author Image
    monogituser
    Participant

    I followed the windows instructions on installing the EV3 monobrick firmware. I put the sdcard in the EV3 and started her up. It now just hangs on ‘Starting…’. It has been like this for about 15 minutes. Should I just wait longer or did I do something incorrect?

    I used the 512MB firmware image. Is there any difference between that and the larger images?

    Please let me know anything you can about this problem. Thanks so much for all the help.

    #4864
    Author Image
    Anders Søborg
    Key Master

    Hi there

    Thanks for trying MonoBrick. I don’t know why this is the case. My best guess would be to try to download one of the other sizes.

    I used the 512MB firmware image. Is there any difference between that and the larger images?

    No they are identical but will if you use a small image for a large SD card you will not be able to use all the remaining space out of the box. So you should go with the one that is close to the size of your SD card.

    Let me know how it goes

    /Anders

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Posted in

Make a donation