Controlling EV3 by WiFi from a PC application?

HomeForumsMonoBrick Communication LibraryControlling EV3 by WiFi from a PC application?

This topic contains 4 replies, has 3 voices, and was last updated by Author Image Anders Søborg 3 years, 7 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #3843
    Author Image
    Marta Krajewska
    Participant

    Hi,
    It is possible to create a PC program in C# (using WiFi connection), which will be able to control EV3?
    For example, is it possible to click button “Rotate” on PC and using WiFi, EV3 will rotate a motor?
    It is very important to me. I’m waiting impatiently for your replies :)

    Greetings,
    Marta

    #3844
    Author Image
    Jacek S
    Participant

    Hi Marta,
    There is a guide with c# sample http://www.monobrick.dk/guides/how-to-establish-a-wifi-connection-with-the-ev3-brick/

    BR
    Jacek

    • This reply was modified 3 years, 7 months ago by Author Image Jacek S.
    #3846
    Author Image
    Marta Krajewska
    Participant

    Thanks a lot Jacek! :)

    #3848
    Author Image
    Marta Krajewska
    Participant

    I have a problem. I don’t know how to do step “Listening for UDP broadcast”.
    Where should I track serial, port, etc.?
    And how to do the next steps?
    Please, help :(

    #3855
    Author Image
    Anders Søborg
    Key Master

    I think that you might have misunderstood the guide. You only need to use the part of the guide that shows how to connect the EV3 to your WiFi network. Once connected you can use the Communication library to connect to the EV3.

    Anders

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Posted in

Make a donation