Building image > 4Gb

HomeForumsMonoBrick EV3 FirmwareBuilding image > 4Gb

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #4386
    Author Image
    Kingshuk Mnadal
    Participant

    Hi,

    I want to build an image greeter than 4Gb in size for my ev3. Can anyone help with the instructions to do the same.

    ~Regards,
    Kingshuk

    #4391
    Author Image
    Tcm0
    Participant

    Maybe you can install LeJOS on the MicroSD card for the EV3, connect PC and EV3 using WiFi and then replace the files on the MicroSD card with https://github.com/Larsjep/monoev3image.
    Another way might be to use a partition tool to make one partition on the MicroSD card larger.
    I havn’t tested both ways so I don’t know whether they work or not.

    #4402
    Author Image
    Lars Jeppesen
    Keymaster

    Hi,

    The best way is to clone the repository at https://github.com/Larsjep/monoev3image
    Then run these 3 scripts:

    ./format_sdcard.sh
    ./update_sdcard.sh /mnt
    ./make_ev3lib.sh /mnt

    P.S. Remember that the 4GB image can be used on larger SD-cards, but only 4GB will be usable.

    Regards
    Lars

    • This reply was modified 10 years, 4 months ago by Author ImageLars Jeppesen.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Posted in

Make a donation